Return your purchase within 90 days at no cost.
Which year is your Ford Ranger?
Choose a Year
1985
1987
1988
1985-1988 Ford Ranger 39.8 in. Drive Shaft Rear Side A-Premium APDS1060
Part # APDS1060
Item # 1012YP1P
$309.99
Check if this fits your vehicle
Add vehicle
Check if this fits your vehicle
Add vehicle
Dispatch within 1 business day
90 days free return
Specifications
Show all
Note
【Note-1】 This item only fits the vehicle with 4WD (Four Wheel Drive).
【Note-2】 This item fits the vehicle with a Short Wheelbase, With a 39.80 inch (1011mm) Long Driveshaft.
【Note-2】 This item fits the vehicle with a Short Wheelbase, With a 39.80 inch (1011mm) Long Driveshaft.
Features
High quality A-Premium aftermarket parts - Drive Shaft
To ensure optimal coverage under our 3-year unlimited mileage warranty, please use our vehicle selector to purchase the most compatible Drive Shaft for your specific Car.
Prompt Delivery Assurance. Our efficient logistics provide quicker delivery times than those offered by standard retail outlets.
Refined Steering Stability. With the innovative Drive Shaft Assembly, regain your vehicle's premium steering feel and enhance your suspension's robustness for superior wheel handling.
To ensure optimal coverage under our 3-year unlimited mileage warranty, please use our vehicle selector to purchase the most compatible Drive Shaft for your specific Car.
- Installation feasibility is contingent upon the following parameters: Rear Side, 4WD, 39.8 inch.
- Provides Unyielding Support for Drive Shaft Consistency.
- Crafted with Precision for Endurance and Effective Performance Via Rigorous Testing.
- Hassle-Free and Rapid Setup.
- Reliable Under High-Pressure Situations.
Prompt Delivery Assurance. Our efficient logistics provide quicker delivery times than those offered by standard retail outlets.
Refined Steering Stability. With the innovative Drive Shaft Assembly, regain your vehicle's premium steering feel and enhance your suspension's robustness for superior wheel handling.
Show all
0
Specifications
Part interchange
Part numbers listed below indicate interchangeable parts. These parts share the same size, parameter, function and compatibility. However, please note that items from different brands may have minor variations.
ZDS9423
65-9423
Compatibility
Check if this fits your vehicle
Add vehicle
Check if this fits your vehicle
Add vehicle
This part is compatible with (3)vehicles
All
Ford
| 1985 - 1985 | Ford | Ranger |
| 1987 - 1987 | Ford | Ranger |
| 1988 - 1988 | Ford | Ranger |
Highlights
Note detail
Shipping and warranty
Fast shipping
The order will be dispatched within 1 business day, and the package will arrive within your order's estimated date. Please click Shipping Policy for more details.
Easy return
Every order comes with a 90-day free return which means you don't have to pay for a return slip. Please click Return Policy for more details.
Warranty policy
All parts are quality-tested to meet the top-tier aftermarket standards. Please click Warranty Policy for more details.
Why choose A-Premium.com
Free standard shipping on all orders, no minimum required.
Get assistance from live customer service team 24/7.
We guarantee that all parts will fit your vehicle perfectly.
Frequently Asked Questions
How do I check my vehicle’s drive type before ordering a driveshaft?
You can easily find out your vehicle’s drivetrain (FWD, AWD, RWD, or 4WD) by entering your 16074-digit VIN into a VIN decoder website.<br> Your VIN is usually located on the dashboard near the windshield or on a sticker inside the driver’s door frame.
How do I measure driveshaft length?
1. <b>Start at the front flange</b><br> Place one end of the tape measure at the outer edge of the front flange.<br> 2. <b>Extend the tape to the rear flange or yoke</b><br> Stretch the tape measure to the outer edge of the rear flange.<br> 16060. <b>Record the total length</b><br> Note the distance shown on the tape measure is the <b>end-to-end</b> length of the driveshaft, typically measured in <b>inches</b>.
How can I verify my engine type before buying a driveshaft?
To make sure you order the correct driveshaft, it’s important to confirm your vehicle’s engine type. Here are two easy ways to check:<br> 1.<b>Check the VIN</b><br> The VIN is a 17-digit code found on your dashboard near the windshield or inside the driver’s door.<br> The 8th digit usually represents your engine type (this may vary by manufacturer).<br> 16059.<b>Look under the hood</b><br> Check for engine labels or stickers — often found on the valve cover, engine block, or radiator support.<br> If you're unsure, feel free to send us your VIN and vehicle details — we're happy to help verify it for you!
How do I confirm my vehicle’s transmission type before ordering driveshaft?
<b>Use the VIN to check the transmission type</b><br> You can find out what transmission your vehicle has by using your VIN. It’s usually located on the dashboard or inside the driver’s door. Just enter it into a VIN check website and it will show you whether your car has an automatic, manual, or CVT transmission.<br> <b>Check the gear shift lever</b><br> You can also tell what kind of transmission your car has by looking at the gear shifter:<br> If it has “P, R, N, D,” it’s automatic.<br> If it has numbers like “1, 2, 3, 4, 16062”and you shift manually, it’s manual.<br> Some CVTs look like automatics but may have “L”or“S”on the shifter.<br>
How do I measure driveshaft wheelbase(<b>Front to Rear Axle</b>)?
To ensure you get the correct driveshaft length, it’s important to measure your wheelbase — the distance between the front and rear axles of your vehicle. Here's how to do it properly:<br> 1.<b>Park on a flat surface</b><br> Make sure the vehicle is parked on level ground for the most accurate measurement.<br> 2.<b>Choose one side of the vehicle</b><br> Pick either the driver or passenger side. Measuring along one side is sufficient.<br> 16060.<b>Measure from center to center</b><br> Use a tape measure to go from the center of the front wheel hub (not the edge of the tire) to the center of the rear wheel hub.<br> This measurement is your vehicle's actual wheelbase, which helps determine the correct driveshaft length needed, especially for custom orders. It is not the length of the driveshaft itself.
Reviews
Dispatch within 1 business day
90 days free return
Attention to customers from California:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov/.