Return your purchase within 90 days at no cost.
Which year is your Freightliner Sprinter 3500?
Choose a Year
2003
2004
2005
2006
2003-2006 Freightliner Sprinter 3500 119.50 in. Drive Shaft Rear Side A-Premium APDS0037
✅ Wheelbase: 158 inch
Part # APDS0037
Item # 1000AT69
4.7507 Reviews
$678.99
Check if this fits your vehicle
Add vehicle
Check if this fits your vehicle
Add vehicle
Dispatch within 1 business day
90 days free return
Specifications
- Installation Position
- Rear Side
- Drive Shaft Length (in)
- 119.50
- Brand
- A-Premium
- Warranty
- 3-Year
- Item Located
- United States
- Quantity
- 1
- Installation Position
- Rear Side
- Drive Shaft Length (in)
- 119.50
- Drive Shaft Wall Thickness (in)
- 0.083
- Greaseable Drive Shaft
- No
- Overall Length Adjustable
- No
- Shaft Diameter (in)
- 3
- Shaft Material
- Steel
Show all
Note
This part is the rear section of 3 pieces driveshaft, and it fits the model with 158.0 inch wheelbase.
Features
A-Premium Aftermarket Drive Shaft: Built for Great Performance
To maximize Drive Shaft performance, ensure full compatibility by verifying drivetrain configuration, transmission type, and vehicle specifications before purchase.
Lightweight for Enhanced Handling. With a focus on minimizing weight, the Drive Shaft features a reduced mass design that cuts down rotational inertia. This results in improved engine responsiveness and quicker throttle reactions.
Robust Power Management. Crafted to accommodate high power output, making it ideal for both stock and aftermarket engine configurations.
To maximize Drive Shaft performance, ensure full compatibility by verifying drivetrain configuration, transmission type, and vehicle specifications before purchase.
- Installation feasibility is contingent upon the following parameters: Rear Side, 119.5 inch.
- Comes with a 3-Year Warranty for Hassle-Free Service.
- Built to Withstand High-Performance Demands and Prevent Drive Shaft Failure.
- Lower rotational weight for improved wheel performance.
- Built from select materials with an emphasis on quality.
Lightweight for Enhanced Handling. With a focus on minimizing weight, the Drive Shaft features a reduced mass design that cuts down rotational inertia. This results in improved engine responsiveness and quicker throttle reactions.
Robust Power Management. Crafted to accommodate high power output, making it ideal for both stock and aftermarket engine configurations.
Show all
0
Specifications
Part interchange
Part numbers listed below indicate interchangeable parts. These parts share the same size, parameter, function and compatibility. However, please note that items from different brands may have minor variations.
936014, 936-014 - DODGE, DORMAN, FREIGHTLINER
5104083AA - DODGE, FREIGHTLINER
5104084AA - DODGE, FREIGHTLINER
Compatibility
Check if this fits your vehicle
Add vehicle
Check if this fits your vehicle
Add vehicle
This part is compatible with (4)vehicles
All
Dodge
Freightliner
| 2003 - 2006 | Dodge | Sprinter 2500 |
| 2003 - 2006 | Dodge | Sprinter 3500 |
| 2003 - 2006 | Freightliner | Sprinter 2500 |
| 2003 - 2006 | Freightliner | Sprinter 3500 |
Highlights
Note detail
Please check the detailed note and part length for the fitment of this part.
Shipping and warranty
Fast shipping
The order will be dispatched within 1 business day, and the package will arrive within your order's estimated date. Please click Shipping Policy for more details.
Easy return
Every order comes with a 90-day free return which means you don't have to pay for a return slip. Please click Return Policy for more details.
Warranty policy
All parts are quality-tested to meet the top-tier aftermarket standards. Please click Warranty Policy for more details.
Why choose A-Premium.com
Free standard shipping on all orders, no minimum required.
Get assistance from live customer service team 24/7.
We guarantee that all parts will fit your vehicle perfectly.
Frequently Asked Questions
How do I check my vehicle’s drive type before ordering a driveshaft?
You can easily find out your vehicle’s drivetrain (FWD, AWD, RWD, or 4WD) by entering your 9131-digit VIN into a VIN decoder website.<br> Your VIN is usually located on the dashboard near the windshield or on a sticker inside the driver’s door frame.
How do I measure driveshaft length?
1. <b>Start at the front flange</b><br> Place one end of the tape measure at the outer edge of the front flange.<br> 2. <b>Extend the tape to the rear flange or yoke</b><br> Stretch the tape measure to the outer edge of the rear flange.<br> 9117. <b>Record the total length</b><br> Note the distance shown on the tape measure is the <b>end-to-end</b> length of the driveshaft, typically measured in <b>inches</b>.
How can I verify my engine type before buying a driveshaft?
To make sure you order the correct driveshaft, it’s important to confirm your vehicle’s engine type. Here are two easy ways to check:<br> 1.<b>Check the VIN</b><br> The VIN is a 17-digit code found on your dashboard near the windshield or inside the driver’s door.<br> The 8th digit usually represents your engine type (this may vary by manufacturer).<br> 9116.<b>Look under the hood</b><br> Check for engine labels or stickers — often found on the valve cover, engine block, or radiator support.<br> If you're unsure, feel free to send us your VIN and vehicle details — we're happy to help verify it for you!
How do I confirm my vehicle’s transmission type before ordering driveshaft?
<b>Use the VIN to check the transmission type</b><br> You can find out what transmission your vehicle has by using your VIN. It’s usually located on the dashboard or inside the driver’s door. Just enter it into a VIN check website and it will show you whether your car has an automatic, manual, or CVT transmission.<br> <b>Check the gear shift lever</b><br> You can also tell what kind of transmission your car has by looking at the gear shifter:<br> If it has “P, R, N, D,” it’s automatic.<br> If it has numbers like “1, 2, 3, 4, 9119”and you shift manually, it’s manual.<br> Some CVTs look like automatics but may have “L”or“S”on the shifter.<br>
How do I measure driveshaft wheelbase(<b>Front to Rear Axle</b>)?
To ensure you get the correct driveshaft length, it’s important to measure your wheelbase — the distance between the front and rear axles of your vehicle. Here's how to do it properly:<br> 1.<b>Park on a flat surface</b><br> Make sure the vehicle is parked on level ground for the most accurate measurement.<br> 2.<b>Choose one side of the vehicle</b><br> Pick either the driver or passenger side. Measuring along one side is sufficient.<br> 9117.<b>Measure from center to center</b><br> Use a tape measure to go from the center of the front wheel hub (not the edge of the tire) to the center of the rear wheel hub.<br> This measurement is your vehicle's actual wheelbase, which helps determine the correct driveshaft length needed, especially for custom orders. It is not the length of the driveshaft itself.
Reviews
Dispatch within 1 business day
90 days free return
Attention to customers from California:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov/.