2017 Ford F-150 Fuel Pump
16 itemsDropping the tank is a big job, so it makes sense to replace the fuel pump assembly when the pump is weak, noisy, or the sending unit is already acting up.
- All filters
- Sort By
- Price
- Brand
- Material
- Warranty
【Note-2】 For 2015-2020 Ford F-150 V6 3.5L, this item fits Turbocharged models only, does not fit for Naturally Aspirated models.
【Note-2】 The Gasket is not included in the package.
Premium Fuel Pump Assembly: The Heart of Your Vehicle’s Performance
The fuel pump assembly is more than just a component; it is the heart of your vehicle's fuel system. Its primary job is to deliver a precise volume of gas from the fuel tank to the engine at a consistent fuel pressure, ensuring your car or truck runs with maximum efficiency and reliability.
In modern engines, such as those found in a Honda Accord or Toyota Camry, the assembly typically resides in-tank. This unit is a complete package, integrating the electric fuel pump, fuel gauge sending unit, filters, and sometimes the pressure regulators into one engineered device.
How does a fuel pump assembly work in my vehicle?
The fuel pump system operates on a simple yet vital principle: constant circulation and pressurized delivery. When you turn the key, the electric fuel pump is activated, drawing fuel through a strainer to remove large debris.
The pump then pushes the fuel through the lines toward the fuel injectors, with each injector spraying fuel into the engine as part of the fuel injection process. To maintain stability, the assembly ensures the fuel pressure stays within a specific range (typically 40–60 psi for most fuel-injected applications). It must also run smoothly and continuously for proper fuel delivery during vehicle operation. By staying submerged in the tank, the pump is naturally cooled and lubricated by the gasoline, extending its life and durability.
What is the difference: High Pressure vs. Mechanical vs. Electric Fuel Pump Types?
Understanding the difference between pump types is crucial for enthusiasts and daily drivers alike.
Feature | Mechanical Fuel Pump | Electric Fuel Pump | High-Pressure Fuel Pump (HPFP) |
Drive Source | Driven by the camshaft | Battery/Electrical system | Engine camshaft (Direct Injection) |
Pressure | Low (10–15 psi) | Moderate (40–60 psi) | Extreme (Up to 30,000 psi) |
Location | On the engine block | In-tank or in-line | On the cylinder head |
Common Use | Older carbureted engines | Modern engines (e.g., Nissan Altima) | Direct-injection systems |
While mechanical pumps are reliable for vintage truck builds, electric pumps offer the power and efficiency needed for today's vehicle performance. For those seeking a performance upgrade, high-flow aftermarket units can support increased horsepower for aggressive driving.
What are the symptoms of a failing fuel pump assembly?
Before your car leaves you stranded, it will often provide warning signs of low fuel pressure. Keep an eye out for these symptoms:
Sputtering at High Speeds: If the pump cannot maintain volume, the engine will hesitate.
Whining Noise: A loud screeching from the fuel tank area often signals worn internal seals or bearings.
Difficulty Starting: If the system loses prime, it takes longer to build the pressure needed to fire the cylinder.
Loss of Power Under Load: Especially noticeable in a Chevrolet Silverado 1500 when towing or climbing hills.
Inaccurate Fuel Gauge: If the sending unit float fails, you'll never know how much gas is actually in the tank.
Why do fuel pump assemblies fail?
While engineered for longevity, several factors can cancel out a pump's reliability:
Contamination: Rust or stuff at the bottom of an old fuel tank can clog the filters.
Running on Empty: Regularly running low on fuel exposes the pump to air, causing it to overheat.
Electrical Issues: Corroded wiring or failing relays can risk mimicking a dead pump.
Wear and Tear: Over time, the internal motor simply loses the ability to provide the required flow.
How to install a new fuel pump assembly?
Replacing a fuel pump assembly is a standard task for a mechanic or a savvy DIYer. Here is a simplified replacement guide:
Relieve Pressure: Locate the fuel port and safely bleed the fuel system.
Access the Tank: In many cars like the Ford F-150, you may need to drop the tank; in others, there is an access panel under the rear seat.
Disconnect: Carefully remove the electrical units and fuel lines.
Remove and Swap: Unscrew the locking ring, lift out the old assembly, and install the new unit ensuring the seals are seated perfectly.
Test: Prime the system by cycling the ignition several times before starting the engine.
Pro Tip: Always test the electrical connectors for tracking issues before assuming the pump is the only problem.
Buying Guide: Why you should repair the Whole Fuel System
When you buy a new fuel pump, don't just stop there. To qualify your repair as a long-term investment, consider a "one-stop" approach by replacing related fuel-system items together:
Clean/Replace the Fuel Tank: New pumps die quickly in dirty tanks.
Service Fuel Injectors: Make sure each injector is delivering fuel efficiently into the engine.
Replace the Fuel Tank Pressure Sensor: This helps your EVAP system function correctly, preventing "Check Engine" lights, while the pressure regulator maintains consistent system pressure.
Investing a bit more money upfront on a complete system refresh saves you from repeating the labor later, providing a more reliable repair.
Why choose A-Premium Fuel Pump Assemblies?
At A-Premium, we discover what drivers need: reliability at a fair price. Our fuel pump assemblies are:
Precision Engineered: Designed with durable materials to meet or exceed stock OEM specifications.
Rigorous Testing: Each unit undergoes a strict test for pressure, flow, and electrical resistance.
Perfect Fit: Whether you drive a Toyota Camry or a heavy-duty truck, our parts are mapped to specific year/make/model data to help you find the right assembly with a guaranteed fit.
Comprehensive Kits: Our units include the pump, strainer, and sensors to support a hassle-free replacement and fitment-ready install.
People Also Ask (FAQ)
Q: Why buy a complete assembly instead of just the pump?
A: Buying a complete fuel pump assembly is much smarter in order to simplify the repair, providing a fast and flawless drop-in installation. Choosing the complete unit also eliminates the tedious, risky task of rebuilding a brittle old housing. Ultimately, it saves you significant time and money by preventing secondary component failures that would otherwise force you to pay for the exact same labor all over again.
Q: Why is my fuel gauge reading inaccurately after installing a pump?
A: This usually happens if the delicate float arm on the sending unit was bent during installation, or if the electrical connector pins are loose or corroded. Always handle the assembly with care during installation to avoid disrupting the resistance tracking mechanism.
Q: Do I need special tools for the install?
A: You will typically need a fuel line disconnect tool and a locking ring wrench. These are essential for ensuring you don't damage the diameter of the fuel lines or the tank itself during the replacement process.
